Slim Wall Fume Hood

Control Air Fume Hood

Low Flow Fume Hood

Flat Face Fume Hood

Handicap Accessible Fume Hood

Interceptor Fume Hood™

Clean View Fume Hood


clean view FUME HOOD

The CVH is design to allow users full view of the interior working space. The combination sash and upper tempered / tinted glass viewing window give the user a clean sight line from top to bottom. You can use either a combination type sash or a standard sash configuration. There is also the added option for full access into the working space when required by a spring pin front glass panel removal system. This allows you to gain complete access after the sash is pushed up past the shortened front panel.

Another version of this system utilizes clear partial side walls to allow viewing from the sides as well. This works well in areas that allow side access such as islands. These can be put back to back or side to side with pass through as needed. This system uses the same construction as the CA style hood with an inner frame and outer sheet metal skin.

Services-
The CVH style hood comes standard with a T-8 two tube fluorescent light and round ducts along with alarm. Optional services include an incandescent vapor proof light, light switch, blower switch, air, gas, vacuum, water, electrical receptacles, and square duct when specified. Fixture configurations are optional based on customer needs. The post fronts are pierced based on the customers request otherwise there will be no cutouts. The hood liner is also pierced in pre-identified locations based on request otherwise the liner will not have holes. For more options and to add items to this style hood look in the accessories section of this catalog.

CLEAN VIEW STANDARD FUME HOOD SIZES

MODEL NO.

“A” WIDTH

HEIGHT

DEPTH

EXHAUST DUCT

BLOWER PRT. NO.

100-047-CVH

47"

60"

 32 3/4”

10" DIAMETER

1LF-RTB-047

100-048-CVH

48"

60"

32 3/4”

10" DIAMETER

1LF-RTB-048

100-058-CVH

58"

60"

32 3/4”

10" DIAMETER

1LF-RTB-058

100-060-CVH

60"

60"

32 3/4”

10" DIAMETER

1LF-RTB-060

100-070-CVH

70"

60"

32 3/4”

12" DIAMETER

1LF-RTB-070

100-072-CVH

72"

60"

32 3/4”

12" DIAMETER

1LF-RTB-072

100-094-CVH

94"

60"

32 3/4”

10" DIAMETER 2

 1LF-RTB-094

100-096-CVH

96"

60"

32 3/4”

10" DIAMETER 2

 1LF-RTB-096

Note: Blowers are offered in single or three phase and optional explosion proof.

Applications: K thru High School, University, Industrial, Special applications, and Institutional

Added Accessory Options: Electrical fixtures, pre-wire, pre-plumb, sash materials, explosion proof fixtures, chemical resistant coated plumbing fixtures, chain and sprocket sash, work surfaces, alarms, sash stops, sash locks, sash sensor with alarm, ceiling enclosures, and explosion proof lighting.