The Control Air style fume hood has a double walled construction that permits the installation of service outlets. The inner walls are large enough to run conduit, piping, and fixtures. The hood's outer shell and frame work are constructed of furniture steel and painted with a corrosion resistant finish. This model also utilizes an airfoil fascia that allows for smoother airflow through the hood during operation. The airfoil located at the front of the countertop allows for the removal of heavy fumes. This airfoil also allows a constant bypass of air to flow through the hood even when the sash is closed. The hood's sash encapsulates laminated safety glass 1/4” thick and is counter balanced by a single weight for smooth operation. For more sash options see the accessories section in this catalog.
The interior is constructed of a white poly resin that is both chemical resistant and easy to maintain. Other materials are available for the interior liners. For more information turn to the accessories section in this catalog. Another feature to choose from with this hood is the Add Air System which utilizes another air source. The enlarged front allows air to flow down the hood's fascia area through the sash and out the exhaust. When the sash is closed the added air flows over the sash top and through the hood. For more information see the accessories section.
One other option is to use the standard front panel or use the constant bypass louvered front panel. As with all our products it is always easier to work with Labcase to find the best solution for you.
Services-
The CA style hood comes standard with a two tube fluorescent light and round ducts. Optional services include an incandescent vapor proof light, light switch, blower switch, air, gas, vacuum, water, electrical receptacles, and square duct when specified. Fixture configurations are optional based on customer needs. The post fronts are pierced based on the customer's request, otherwise, there will be no cutouts. The hood liner is also pierced in pre-identified locations based on request, otherwise, the liner will not have holes. For more options and to add items to this style hood, look in the accessories section in this catalog. This hood is used in variable air and bypass air systems.
For more options and to add items to this style hood see the accessories section. This hood is used in variable air and bypass air systems.
| CA STANDARD FUME HOOD SIZES *For explosion proof blowers contact us | ||||||||
| MODEL NO. | "A" WIDTH |
HEIGHT | DEPTH | BLOWER SIZE & MODEL | CFM | SP | EXHAUST DIAMETER |
WEIGHT |
100-035-CAH |
35" |
57 3/4" |
32 7/8" |
115V. 60HZ 1Ph (1/4 H.P.) 1CA-RTB-035 | 550 |
0.27 |
8" |
170 |
100-036-CAH |
36" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/4 H.P.) 1CA-RTB-036 | 556 |
0.29 |
8" |
173 |
100-047-CAH |
47" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/4 H.P.) 1CA-RTB-047 | 580 |
0.28 |
9" |
198 |
100-048-CAH |
48" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/4 H.P.) 1CA-RTB-048 | 578 |
0.26 |
9" |
205 |
100-058-CAH |
58" |
57 3/4" |
32 7/8" |
115V. 60Hz 1 Ph (1/2 H.P.) 1CA-RTB-058 | 1090 |
0.34 |
10" |
223 |
100-060-CAH |
60" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/2 H.P.) 1CA-RTB-060 | 1089 |
0.36 |
10" |
229 |
100-070-CAH |
70" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/2 H.P.) 1CA-RTB-070 | 1360 |
0.34 |
10" |
269 |
100-072-CAH |
72" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (1/2 H.P.) 1CA-RTB-072 | 1365 |
0.35 |
10" |
275 |
100-094-CAH |
94" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (3/4 H.P.) 1CA-RTB-094 | 1885 |
0.44 |
2- 10" |
298 |
100-096-CAH |
96" |
57 3/4" |
32 7/8" |
115V. 60Hz 1Ph (3/4 H.P.) 1CA-RTB-096 | 1890 |
0.45 |
2- 10" |
308 |
Applications: Industrial, University, & K thru High School
Added Accessory options: Chain and sprocket sash, explosion proof lights and electrical fixtures, chemical resistant coated plumbing fixtures, alarms, sash sensor w/ alarm, ceiling enclosures, pre-wire, pre-plumb, work surfaces. Remote baffle, sash configurations and material choice, and sash stops.
