The slim wall fume hood is designed with simplicity of use and function in mind. The hood utilizes as much space as possible for working area within the hood itself. The interior actually rests against the hood's framework to open up this extra working space. The hood's exterior is constructed of furniture steel and painted with a corrosion resistant finish. The interior is constructed of a white resin for a durable and clean surface. The vertical sliding sash is constructed of furniture steel and painted to match the hood. It encases a 1/4” thick laminated safety glass panel. The vertical sliding sash uses a single counterbalanced weight for smooth and long lasting operation. The design and materials used to construct this fume hood lend themselves to long life and a durable product. This hood is used in both restricted air volume exhaust systems and variable air volume systems. Other options include a louvered front panel for added air bypass, (constant bypass). This fume hood can also use the Add Air System that uses an alternative air source versus taking away tempered air from the lab. The system streams air across the hoods front fascia area and is pulled in through the sash opening or, if the sash is closed, through the top of the sash. For more details on the Add Air System see the accessories section in this catalog. You can also use stainless steel sash configurations with this hood.
Services
This hood offers a round duct, two-tube fluorescent light, and painted steel sash. Optional services include an incandescent vapor proof light and square duct. For other options visit the accessories portion of this catalog.
Note this hood has very narrow walls that allow little or no access so fixtures including electrical outlets will be mounted off the work surface or through the base cabinet.
Air System see the accessories section.
| SLIM WALL STANDARD FUME HOOD SIZES * For explosion proof blowers contact us | ||||||||
MODEL NO. |
“A” WIDTH |
HEIGHT |
DEPTH |
BLOWER SIZE & MODEL # |
CFM |
STATIC PRESSURE |
EXHAUST DUCT |
APPROX. WEIGHT |
100-035-SWH |
35" |
56” |
30" |
115V. 60HZ 1Ph (1/4 H.P.) 1SW-RTB-035 |
845 |
0.28 |
8" DIA. |
151 |
100-036-SWH |
36" |
56" |
30" |
115V. 60Hz 1Ph (1/4 H.P.) 1SW-RTB-036 |
850 |
0.30 |
8" DIA. |
155 |
100-047-SWH |
47" |
56" |
30" |
115V. 60Hz 1Ph (1/4 H.P.) 1SW-RTB-047 |
925 |
0.25 |
9" DIA. |
176 |
100-048-SWH |
48" |
56" |
30" |
115V. 60Hz 1Ph (1/4 H.P.) 1SW-RTB-048 |
930 |
0.27 |
9" DIA. |
181 |
100-058-SWH |
58" |
56" |
30" |
115V. 60Hz 1 Ph (1/2 H.P.) 1SW-RTB-058 |
1153 |
0.35 |
10" DIA. |
190 |
100-060-SWH |
60" |
56" |
30" |
115V. 60Hz 1Ph (1/2 H.P.) 1SW-RTB-060 |
1160 |
0.40 |
10" DIA. |
210 |
100-070-SWH |
70" |
56" |
30" |
115V. 60Hz 1Ph (1/2 H.P.) 1SW-RTB-070 |
1408 |
0.36 |
10" DIA. |
247 |
100-072-SWH |
72" |
56" |
30" |
115V. 60Hz 1Ph (1/2 H.P.) 1SW-RTB-072 |
1415 |
0.41 |
10" DIA. |
253 |
100-094-SWH |
94" |
56" |
30" |
115V. 60Hz 1Ph (3/4 H.P.) 1SW-RTB-094 |
1920 |
0.43 |
2 - 10" DIA. |
275 |
100-096-SWH |
96" |
56" |
30" |
115V. 60Hz 1Ph (3/4 H.P.) 1SW-RTB-096 |
1925 |
0.45 |
2 - 10" DIA. |
280 |
Typical Applications: General Industry and K thru High School Added accessory options: Chain and Sprocket driven sash, Explosion proof lights, Switches for blower and lights. Gas fixtures, water fixtures, ceiling enclosures, and work surfaces. Deck mounted plumbing fixtures are offered with standard chrome plated or a chemical resistant finish. Remote controls are typically installed in the supporting casework.
