The perchloric style fume hood is designed for working with perchloric acids. All exposed areas within the hood are constructed from 316 stainless steel that is at least 16-gauge material. The sash and the airfoil are also constructed from the same materials. This hood is like the Control Air style hood in that it has the same double walled construction for electrical and plumbing installations. The outer side panels are removable for access to plumbing and wiring.The exterior is constructed of furniture steel and painted with a corrosion and chemical resistant finish. The sash is designed to operate smoothly and has a single counter balance weight. The sash encapsulates double paned laminated safety glass that is 1/4” thick.
The interior is completely welded together including the work surface except for the baffles which are removable and adjustable. The work surface has a ¼” dish and a trough with a 1 ½” diameter drain that runs along the back of the hood. This helps control spills and clean up. The trough is integrated into the work surface and is sloped down to the drain. All horizontal and vertical angles are coved. This hood also features a wash down system to aid in cleaning up the interior after use.
Services
The Perchloric style hood comes standard with a two-tube fluorescent light and round exhaust duct. Optional services include a light switch, blower switch, air, gas, vacuum, water, electrical receptacles, incandescent vapor proof light, and square duct. All fixtures are optional. The post front panels are pierced, based on customer request, as well as fixture locations within the liner. If no fixtures or receptacles are requested with locations, then no holes will be pierced in the post or liner. This hood is used in variable air and bypass air systems. For the bypass system you must use the louvered front panel when ordering this hood.
If you have questions or concerns about the addition of accessories contact your dealer representative who will work with you to help finalize your design.
| PERCHLORIC STANDARD FUME HOOD SIZES | |||||
MODEL NO. |
“A” |
HEIGHT |
DEPTH |
EXHAUST DUCT |
BLOWER PRT. NO. |
100-035-PFH |
35" |
57 3/4" |
32 7/8" |
8" DIAMETER |
1PF-RTB-035 |
100-036-PFH |
36" |
57 3/4" |
32 7/8" |
8" DIAMETER |
1PF-RTB-036 |
100-047-PFH |
47" |
57 3/4" |
32 7/8" |
9" DIAMETER |
1PF-RTB-047 |
100-048-PFH |
48" |
57 3/4" |
32 7/8" |
9" DIAMETER |
1PF-RTB-048 |
100-058-PFH |
58" |
57 3/4" |
32 7/8" |
10" DIAMETER |
1PF-RTB-058 |
100-060-PFH |
60" |
57 3/4" |
32 7/8" |
10" DIAMETER |
1PF-RTB-060 |
100-070-PFH |
70" |
57 3/4" |
32 7/8" |
10" DIAMETER |
1PF-RTB-070 |
100-072-PFH |
72" |
57 3/4" |
32 7/8" |
10" DIAMETER |
1PF-RTB-072 |
Note: Blowers are offered in single or three phase, this model uses EXPLOSION PROOF models only.
Applications: Industrial, Institutional, & University
Added Accessory options: Chain and sprocket sash, explosion proof lights and electrical fixtures, special chemical resistant coated plumbing fixtures, alarms, sash sensor w/ alarm, ceiling enclosures, pre-wire, pre-plumb, sash stops.