Specifically designed to remove heat, odors, or dust from working interior area
The HRH™ Hood series is a specific design to remove non-toxic heat, fumes, odor from the interior working environment. Typically used for centrifuges or other heat bearing devices or equipment. The interior liner is a standard UL approved Polyresin white in color material. Ceramics, epoxy, and stainless steel can also be specified. This system has a front control panel to house a light switch, blower switch, timing device, or other needed features such as a duplex. The system shown only has a light switch due to the internal outlets provided and the internal thermal sensing device for auto blower on off. A manual on / off switch can also be added and the internal sensor has adjustment ranges from 75 to 150 degrees.
The frame is constructed from cold rolled furniture grade steel. The front, top, and finished back panels are removable and also fabricated from steel. The steel is prepped to accept a powder coat finish. The vertical sliding sash is also fabricated from steel and is attached to the counter weight via an aircraft style coated cable and pulley system. You can also use a horizontal or combination horizontal vertical sliding sash with this system.
The glass in the sash is sealed in a neoprene channel but is replaceable in case of damage. Laminated safety glass ¼” thick is typically used unless tempered glass is required. All electrical components are UL approved devices pre-wired back to the junction box located in the hoods upper right hand corner. From the junction box typically three power cords are installed, one for lighting / blower, two for individual circuits of the interior outlet. Systems are sold designed to meet customer driven requirements. Standard sizes include: 24”, 30”, 35”, 36”, 47”, 48”, 58”, 60”, 70” and 72” (Height is 51” with a sash opening of 26”max.)
|
HRH STANDARD HOODS MODEL NUMBERS WIDTH 100-024-HRH 24” 100-030-HRH 30” 100-035-HRH 35” 100-036-HRH 36” 100-047-HRH 47” 100-048-HRH 48” 100-058-HRH 58” 100-060-HRH 60” 100-070-HRH 70” 100-072-HRH 72” |