This hood is designed to allow the operator or operators access to the hood's work surface from both sides of an island counter top. The hood has applications for use in teaching institutions and wherever dual access can aid in the lab's layout and use. The hood exterior is constructed of furniture steel and painted with a corrosion resistant finish. The interior is constructed of a chemical resistant white poly resin. A 2’ two-tube fluorescent light in 2 locations is standard along with the two painted steel sash and centered exhaust duct. This fume hood is used in restricted air volume exhaust systems, constant bypass, and variable air volume systems.
Services
This unit typically does not offer many accessories because of the lack of wall space within the hood. However, fixtures can be deck mounted with the remote control mounted in the supporting casework. Options include an incandescent vapor proof light, light switch, blower switch, electrical receptacles, and deck mounted fixtures.
| PASS THROUGH STANDARD FUME HOOD SIZES | |||||
MODEL NO. |
“A” |
HEIGHT |
DEPTH |
EXHAUST DUCT |
BLOWER PRT. NO. |
100-047-PTH |
47" |
57 3/4" |
35 ¾” |
9" DIAMETER |
1PT-RTB-047 |
100-048-PTH |
48" |
57 3/4" |
35 ¾” |
9" DIAMETER |
1PT-RTB-048 |
100-058-PTH |
58" |
57 3/4" |
35 ¾” |
10" DIAMETER |
1PT-RTB-058 |
100-060-PTH |
60" |
57 3/4" |
35 ¾” |
10" DIAMETER |
1PT-RTB-060 |
100-070-PTH |
70" |
57 3/4" |
35 ¾” |
10" DIAMETER |
1PT-RTB-070 |
100-072-PTH |
72" |
57 3/4" |
35 ¾” |
10" DIAMETER |
1PT-RTB-072 |
Note: Blowers are offered in single or three phase and explosion proof if needed. Single phase Draw is 115V. 60Hz. Typical
